T1-11 Siding Painting in Michigan
T1-11, LP SmartSide and Masonite siding all have one weak spot: water at the edges. Our T1-11 siding painting seals and repairs engineered siding, then protects it with Rhino Shield’s ceramic coating and a 25-year warranty.
4.8
98 reviews on
Get Your Free Estimate
Seal Engineered Siding Before the Edges Swell
T1-11 plywood panels, LP SmartSide and Masonite hardboard show up on a lot of Michigan homes, cabins, additions and garages. They’re affordable and look good when new. They’re also made from wood fibers or layers that react badly to water.
Once moisture gets into an unsealed edge, groove or nail hole, the material swells, the layers start to separate and paint peels off in sheets. Bottom edges near the ground and grooves that hold water usually go first.
T1-11 siding painting done right starts with sealing those weak points. We replace panels that are too far gone, seal edges and seams, prime and then coat with Rhino Shield. The ceramic coating keeps water out while letting moisture vapor escape, and it stays flexible as the siding moves through Michigan seasons.
Table of Contents
Engineered Siding Problems We Fix
Swollen or Mushroomed Edges
Water soaking into bottom edges makes them puff up and crumble. Badly swollen sections are replaced; the rest are sealed before coating.
Delaminating T1-11 Panels
When plywood layers separate, the face peels away. Damaged panels are repaired or swapped so the coating goes over solid material.
Peeling Paint in the Grooves
T1-11 grooves trap water and dirt, so paint fails there first. We clean the grooves thoroughly and work the coating into them.
Soft Spots and Rot
Engineered siding near decks, roofs and grade can go soft. We probe for it during the inspection and fix it first.
Mildew and Weathering
Shaded engineered siding grows mildew and weathers quickly. Cleaning and sealing slow that down a lot.
Why Choose Rhino Shield for T1-11, LP and Masonite
Edge-first prep. Sealing edges, seams and fastener holes is what keeps engineered siding from swelling again.
Honest panel assessment. If a panel is too damaged to coat, we tell you and replace it rather than covering a problem.
Breathable, flexible coating. Water stays out, vapor gets out, and the finish moves with the siding.
25-year warranty. Against cracking, chipping and peeling.
Local family business. Marc and Sheryl Mercier run Rhino Shield of Michigan from Brighton, fully licensed and insured.
Our T1-11 Siding Painting Process
- Inspection. We check every wall for swelling, delamination, soft spots and failing paint.
- Cleaning. Siding and grooves are washed to remove dirt, mildew and loose paint.
- Repairs and panel replacement. Damaged sections are repaired or replaced.
- Edge and seam sealing. Bottom edges, seams, trim joints and fastener holes are sealed.
- Priming and coating. The siding is primed and coated with the Rhino Shield ceramic finish.
- Walkthrough. We do detail work, clean up and inspect the house with you.
T1-11 Siding Painting Cost in Michigan
For a typical home with about 2,000 square feet of wall area, a Rhino Shield system usually runs $13,000 to $18,000, or roughly $6.50 to $9.00 per square foot. Panel replacement and edge repairs are priced separately after inspection.
Replacing all engineered siding is a big project. If most panels are sound, sealing and coating them is usually the more affordable path. Our pricing page has more detail.
Areas We Serve Across Michigan
We see a lot of T1-11 and LP siding on cabins and cottages up north around Traverse City and Gaylord, and on ranch homes, additions and garages across Livingston County, Oakland County and the Lansing area. We serve all of Southeast Michigan and West Michigan from our base in Brighton.
Related Coating Services
- All surfaces we coat
- Wood siding painting
- Substrate and siding repairs
- Exterior trim painting
- Our installation process
What Our Customers Say
“We had rotted wood replaced prior to the application of Rhinoshield. The workers were courteous, experts, and professional.” Debbie Harper, Google review
“The work crew for Rhino Shield was very professional and courteous. They kept me informed and answered any questions I had pertaining to the work being performed.” Brian Webb, Google review
“We have had so many compliments on how nice the house looks.” Don Sims, Google review
T1-11 Siding Painting FAQs
Yes. T1-11 can be painted or coated once it is cleaned, any delaminated or rotted panels are fixed, and the edges and grooves are sealed. Sealing those weak points is what makes the finish last.
Stain soaks in and shows the wood texture but wears faster and offers less protection for the edges. An opaque coating seals the surface better and lasts longer, which matters on plywood that reacts to moisture.
Lightly swollen areas can be sealed and coated, but badly swollen or crumbling boards should be replaced first. Coating over damaged hardboard won't stop it from breaking down.
Yes. LP SmartSide takes coatings well. Over time the factory finish fades, and a properly prepped coating restores color and protection.
For a typical home with about 2,000 square feet of wall area, expect around $13,000 to $18,000 for the Rhino Shield system, plus any panel repairs. We give an exact quote after an in-home estimate.
Rhino Shield is backed by a 25-year warranty against cracking, chipping and peeling.
Water getting into edges, grooves and nail holes is the usual cause. Sealing those spots before coating stops most repeat peeling.
Book Your T1-11 Siding Painting Estimate
Stop the swelling and peeling before it spreads. Get a free in-home estimate with a clear list of any panels that need attention.
Rhino Shield of Michigan
Contractor ID: MI Lic: #2102200455
Address: 2150 Pless Dr #7A, Brighton, MI 48114
Service Area: Southeast Michigan, Lansing, Grand Rapids, Traverse City
Phone: 810-360-6583
Hours: Mon–Sat, 8:00 AM – 6:00 PM
Email: rhinoshieldmi@gmail.com
License & Insurance: Fully Licensed & Insured in Michigan